Venus Flytrap

Here are the final Venus Flytrap models


First i uploaded a reference picture onto a plane. I then created a box and manipulated the vertices to get a basic outline of the head.


This was then turbosmoothed.


Next i extruded several polygons from the top outside of the head.


And then I modified the ends of them to give them more of a spike shape. I did try to just collapse all of the corners at the top of each extruded spike and it did work. However it shrunk the spikes by about half the size, so this method proved to be the better of the 2, despite it taking longer.


I then shrank the size of each one and turbosmoothed it once again.


Then i mirrored the completed side and rotated the 2 pieces a little to get the merge of the head at the bottom to become more seemless.


Next i created a cylinder which would act as the stem of the flytrap.


I then created another plane with a leaf teaxture applied to it and placed it above most of the stem.


Next i used the Soft Selection tool to give the stem a more jagged look to give it more realism.


Then the texture for the head was applied, and the model was placed upright.


Once i had completed the open mouthed Venus Flytrap model, i thought i'd do another one with a closed mouth. So I went back to an earlier save file and edited it a little.


I then repeated the stem process for the other flytrap model.

I am quite please with the outcome of these models. They have turned out better than I expected. And now to add a background to it...

Stamp Moodboard

It recently occured to me that I hadn't actually researched into stamps. So here is a moodboard!

Before i started actually looking at stamps, i was under the impression that most of them were boring and had a plain white background. However as it can be seen here, i was very wrong. I believe that these stamps would not be quite as eye-catching without backgrounds as they are right now, which is why I am happy to say that I will be adding backgrounds to my own stamps. I think that they are all very nicely done and they have inspired me to improve upon the designs for my stamps that i had originaly intended on using.

Killer Whale With Background (complete)

Done! I eventually found a background that worked nicely. I think the line between the sea and sky is quite seemless which makes it look so much better. I also added another light effect underneath the whale to give it a bit more realism. Finally, I added a SuperSpray by the tail to create a splashing effect. I could probably make it look a little better by perhaps bluring the particles a little, but I am happy with the way its turned out. I may change it at some point though...

I am very happy with this. It has turned out exactly as i imagined. Now i really must make a start on my Venus FlyTrap!

Killer Whale With Background (Incomplete)

Ok, i couldnt resist! I was meant to wait until i'd finished my last model to start on the backgrounds, but i found a great tutorial on how to make the sea so i just had to give it a go.

Its not quite complete yet. Im finding it difficult to get a background image of the sky that doesnt stretch when i apply it. I also need to change it so that the merge between the sea and sky is more seemless. And finally, because of the way the lighting has been angled, the textured effect i have on the whale is not showing on the side facing the camera. Im sure this can easily be fixed, but i have no idea how. I'll have to get some help later! Oh yeah, and i need to add some splashing effects by the tail to make it look more realistic.

For anyone who is interested, here is the tutorial i used:

http://www.youtube.com/watch?v=tE44k7d_FtI

Killer Whale Complete

Here is the complete final model of my Killer Whale.

First, i found a reference picture online and put in on a plane. I then created another plane and placed it infront of the refence. This plane was then shaped into the main body of the whale.

Next i extruded the plane to get it into the shape of a whale's body.

This is what it looks like when it is mirrored.

I then extruded the fins of the whale out. In order to do this I extruded it once, angled it a little then repeated it twice more.

I then extended the size of the fins a little.

I then did the same with the dorsal fin. I extended the plane and then extruded it.

Here i started to work on the tail fin thing. I extruded a small section of the end of the body.

In order to get the tail shape, i had to use the same method as the 2 fins and extrude it several times while angling it inbetween each extrusion. This took quite some time as highlighting the correct vertices and moving them into the correct position proved to be quite a challenge.

However i got there in the end!

The reference plane was the deleted. I then solidified the mirrored section so it became one full object.

A few adjustments were made to make it more Killer whale-like. For example, extending the size of the dorsal fin and tail.

Next, i had to add the texture. To do this I unwrapped the model by using UVW mapping. This seperated the whale model into several sections. I had to find out which bits connected to what and weld them together.

Then came the annoying task of having to draw the white bits of the whale myself onto the mapped model. As you may imagine, this took some time...

However, the work paid off! I then finally added a material effect to make it look more glossy and get a wet effect.

I am very pleased with the model. Hopefully if i finish my next model fast enough, i will be able to add a background to this one. :D

Killer Whale Progression

Using the above image as a refence, i have created this model of a killer whale. I will post the step by step process of how i created it in a later post once i have completed it.

SWOT Analysis

Strengths

I believe that my strengths so far have been understanding Richard's tutorials and using them to my advantage, as well as planning the final design for my stamps.

Weaknesses

My main weakness is lacking the confidence to create something without some sort of tutorial or reference's help. Whener i try to create something from scratch, even something as simple as an apple, i just cant remember/think how to do it.

Opportunities

I am really enjoying this software. So much infact that it has actually crossed my mind to specialise in 3D modeling and animating. I know that the more confident i become with this software, the closer it will bring me to reaching this goal.

Threats

As i previously mentioned, without some sort of guidance i normally dont know where to start. However i know that the more i use 3D Studio Max, the more confident i will become with it and hopefully it will become a second nature to me.

Possible Final Designs

Here are some basic sketches of the final design of the stamps.


During the mood board stage of the project, i took a liking to the idea of somewhere including a rainforest in one of my stamps. So i thought it would be nice to have one in the background of the butterfly stamp.

However creating such a large background, as well as the model itself, may prove to be a bit ambitious as there is only a limited amount of time to get these done. So if i do manage to include a background in the final design, i will make the butterfly much larger to make it the focus of the stamp and only have a handful of trees instead.

I pictured the Venus Fly Trap to be surrounded by other plants and grass with the sun in the background. Upon reflection, i suppose a rain forest background would have suited this subject better as it is more tropical than a butterfly.

Finally, i want to do a killer whale jumping out of the sea. I believe that it wont be as difficult to create the sea as a background rather than millions of trees. So hopefully the final outcome will turn out closely to the sketch.

Chosen Biodiversity Subject Moodboards

Here are a couple of moodboards for each of my chosen subjects. Hopefully these will give me some inspiration when creating my models.